Hot dip galvanized steels

Galvanized steels are covered by a layer of zinc or iron-zinc steel, applied through a continuous hot immersion process, which provides these materials with excellent protection against corrosion, as they add to the physical barrier of the coating. , the galvanic action of zinc.

These products are suitable for your use, both indoors and outdoors. Some of its main uses are: automotive, construction, household appliances, air conditioning equipment, etc.

El thickness of the zinc or iron-zinc layer It can be from a minimum of 60g/m2 up to a maximum of 700g/m2 and are available in qualities ranging from drawing and forming steels, structural steels and high elastic limit steels.

Mechanical Characteristics of Galvanized Steels

Percentages according to EN10111

Direction Thickness: Re (N/Nm2) Rm (N/Nm2) A80(%) A5(%) R90 n90
DX51D+Z T 0,2-0,7 ≥140 270-500 ≥20 - - -
0,7-3 ≥22 - - -
3-6 - ≥26 - -
DX52D+Z T 0,2-0,5 - - ≥24 - - -
0,5-0,7 140-300 270-420
0,7-3 ≥26
3-6 270-430 - ≥28 - -
DX53D+Z T 0,5-3 140-260 270-380 ≥30
3-6 140-290 - ≥33
DX54D+Z T 0,2-0,7 140-220 270-350 ≥34 - ≥1,6 ≥0,18
0,7-3 ≥36
DX56D+Z T 0,2-0,7 120-180 260-420 ≥37 - ≥1,9 ≥0,21
0,7-3 ≥39
DX57D+Z L <3 - - - - - -
T <0,2 - - - - -
0,2-0,7 120-170 ≥39 ≥2,1 ≥0,22
0,7-3 260-350 ≥41

Measurements of Galvanized Steels

Percentages according to EN10111

thickness (mm) Length (mm) Width (mm)
0,6 2000/2500/3000 1000/1250/1500
0,8 2000/2500/3000 1000/1250/1500
1 2000/2500/3000 1000/1250/1500
1,2 2000/2500/3000 1000/1250/1500
1,5 2000/2500/3000 1000/1250/1500
2 2000/2500/3000 1000/1250/1500
2,5 2000/2500/3000 1000/1250/1500
3 2000/2500/3000 1000/1250/1500

Chemical Composition of Galvanized Steels

Percentages according to EN10111

C Si Mn P S You(1)
Dx51D 0,12 0,5 0,6 0,1 0,045 0,3
Dx52D
Dx53D
Dx54D
Dx55D
Dx56D
Dx57D